LEDs, EnergyStar drive flat-screen TV efficiency
Driven by consumer demand and tech, TV industry significantly improves efficiency of flat screen TVs this decade, according to a CEA-sponsored analysis. But 3D TVs consume more power.
The newer your flat-screen TV is, the more energy-efficient it is, according to a study released today by industry group the Consumer Electronics Association.
The average "active mode" power use of LCD flat-screen TVs in the 35-inch to 54-inch category was about 250 watts during the years 2005 to 2007, but is now closer to 100 watts, according to the study. From 2003 to 2010, the LCD power density--or wattage per square inch--fell 63 percent in active mode and dropped 87 percent in standby mode.
Plasma TVs have traditionally drawn more power than LCDs, the study said, but there was improvement in efficiency over the past few years. From 2008 to 2010, the active mode power density for plasma TVs fell 41 percent and the standby mode fell by 85 percent.
According to CNET's TV Energy Efficiency Guide, the average power consumption for plasma TVs is 301 watts. For a traditional LCD, it's 111 watts and 101 watts for LED-lit LCDs.
The three biggest factors determining power consumption are the size of the screen, the type of TV, and the picture settings, according to CNET's guide. The settings for stores are designed to be very bright but consumers can save a significant amount of energy by adjusting those retail settings.
Older cathode-ray tube TVs can be less efficient per square inch, but many consumers buy larger TVs when they buy flat-screen TVs.
EnergyStar and industry competition helped propel the efficiency trend, according to the study. On a technical level, the study said that increased use of LEDs, rather than fluorescent lighting, and improvements in power electronics helped cut standby power.
"Energy Star, competition, innovation, and technology improvements have all been responsible for lower power draw," it said.
The CEA-commissioned study did not examine what impact 3D TVs will have on power consumption. But initial tests by CNET's David Katzmaier found that , with plasmas showing about double the power than when they are 2D mode.
Update: On Friday February 4, the CEA released a revised study to note that plasma TVs as a group "traditionally drew more power than LCD TVs, primarily due to their relatively larger screen sizes." In 2010 models, both TV technologies have similar power densities, the CEA said. This article was changed to reflect the change in the study.
Also, because CNET tends to test larger, higher-end TVs, CNET's average wattage ratings do not reflect the average wattage for the market overall, Katzmaier said.