I used to think that hard-drive models would take over the camcorder market as miniDV slowly faded into the horizon. I've since changed my tune after using flash-based models, especially those that include some onboard memory. However, if you shoot a lot of video--or just don't bother to back it up very often--then a hard-drive model probably makes sense for you, at least until the flash-based camcorders start to include more onboard memory or the price of flash memory cards declines. Sony's Handycam HDR-SR11 is among the cream of the hard-drive AVCHD crop right now, and the same is true for its sister, the HDR-SR12, since the only difference between them is the size of their respective hard drives. (For this review, we tested an SR11.) The SR11 sports a 60GB drive, while the SR12 packs 120GB into its attractive HD-recording body.
That body design is quite nice, though it does have some quirks and comes across as chunky compared with most flash-based models. It's about the same size as a miniDV camcorder, thanks to its hard drive. Plus, that drive gives you a nice grip, while some flash camcorders have awkwardly designed grips. Sony placed the controls well, however, you will have to use the 3.2-inch touch screen to get to some important functions, which can be an annoying way to use a camcorder. The large size of the screen helps a bit compared with some other Sony models, but the screen is still fingerprint prone. The fingerprints can be distracting when recording, and if you try to change a setting while shooting, you'll likely end up jostling the camcorder while you make the change. Thankfully, Sony included a small button up front, below the lens, for backlight compensation, so you won't have to hit the menus for that.
Just above that button is the CAM CTL dial. It has a button on the front of it that lets you activate manual focus, exposure compensation, white balance shift, or shutter speed, though you can only assign one such function to the wheel at any given time. This wouldn't be the end of the world, but you have to dig pretty deep into the menu to assign something to the wheel. Sony didn't call the menu item CAM CTL, instead it called it Dial Setting. True, it's the only dial on the camcorder, but if you're going to label it the CAM CTL on the body, you should be consistent in the menu. My other main gripe about the body design is that Sony used a mini HDMI connector (Type C) instead of a normal-size connector. The mini cables are harder to find and more expensive. With a camcorder this size, Sony could have found room for a full-size connector. I did like the doors that cover the various connectors though. The doors are plastic and have nifty hinges and slides to get them out of the way while using the jacks. I was worried that the headphone or mic-in jacks might not have enough room, but after trying several headphones with various size connectors, I was impressed that all fit amply. An Active Interface Shoe (Sony's proprietary hot shoe) sits atop the camcorder so you can add one of Sony's microphones or video lights.
In a most welcome step up from last year's SR7, the SR11, and SR12 offer full 1,920x1080 HD capture, thanks to its maximum 16-megabit-per-second AVCHD recording mode. The other three AVCHD recording modes record at 1,440x1,080 resolution, like last year's models. At the top AVCHD quality level, you can fit up to 7 hours and 10 minutes of video on the SR11's 60GB hard drive. If you bring the quality level down to the minimum HD setting of 5Mb per second, you can fit up to 22 hours, 50 minutes of video. Stepping down to standard definition, you can record up to 14 hours, 40 minutes of video at the highest quality setting and up to 41 hours, 50 minutes at the lowest-quality setting. Double those numbers for the SR12's 120GB drive. The NP-FH60 lithium ion battery gives you up to 90 minutes of continuous recording time, according to Sony, though you should expect more in the range of 40 minutes to 50 minutes during regular use when recording to the hard drive.