AV receivers are supposed to have inputs and outputs for everything, but manufacturers have been, especially when it comes to wireless audio streaming.
The Onkyo TX-NR626 ($500 street) is an exception, offering both built-in Bluetooth and Wi-Fi, which makes it much easier to use with increasingly ubiquitous smartphones and tablets. From the other end of the spectrum, the TX-NR626 is the only midrange AV receiver we've seen with a dedicated turntable input, a convenient bonus for anyone who still likes to spin vinyl. Pair that up with six HDMI inputs and there's not much the TX-NR626 can't connect to.
There's no doubt the Onkyo TX-NR626 is one of the best values of the 2013 receiver class, but it looks to be just a hair behind the($450 street), which offers Bluetooth, Wi-Fi, and AirPlay for $50 less. Still, the TX-NR626 is awfully strong, especially if you'll take advantage of that turntable input. Keep an eye on the street price as the year goes on, as Onkyo's receivers have a tendency to get heavily discounted over time.
Design: The boxiest box
AV receivers are big and boxy by nature, and Onkyo's models may be the boxiest of them all. The TX-NR626's sharp edges and large, flat front panel give it a muscular, brutish look that doesn't exactly blend into a typical living room.
It also has a busier front panel than most, especially compared with the more modern-looking. It wouldn't be our first pick for aesthetics; if you want something that looks nicer, look at or a .
The included remote is good, as far as AV receiver remotes go. The white buttons make it easier to select things in a dim home theater and important buttons like volume and the directional pad are well-located. It's not as simple as the's clicker, but it's also miles better than the inscrutable remotes included with the and .
Features: Bluetooth, Wi-Fi, and turntable support
For a receiver of this price, the TX-NR626 is packed with features.
There are six HDMI inputs on the back panel, including an MHL-compatible HDMI input, which is a neat feature that enables you to use a, among other devices. There's also quite a bit of support for legacy devices, including a dedicated phono input for turntables, which no other receiver at this price has. It's a cool extra that's arguably a lot more useful than many of the other dubious features included on AV receivers these days.
The TX-NR626 is also hip to modern tech, including built-in Bluetooth and Wi-Fi. Bluetooth is especially welcome, since it's the easiest way to stream music from nearly any smartphone or tablet. Wi-Fi is also nice because it allows to take advantage of the TX-NR626's networking features without a wired Ethernet connection, including DLNA, smartphone control, firmware updates, and streaming services such as Spotify, Pandora, SiriusXM, Flickr, and Internet radio. The only similar receiver to offer that much wireless functionality at this price is Sony's STR-DN840, which also supports AirPlay.
The rest of the features are less important for mainstream buyers. The TX-NR626 is a 7.2-channel receiver, but most buyers won't need the extra functionality that makes possible: surround back channels, powered second-zone audio, and projector, you won't need them. And while AirPlay isn't built in, you can always add that functionality later with an , which is anyway.. It also has analog video upconversion, but you won't need it if all your devices use HDMI. The TX-NR626 is one of the few receivers to offer dual HDMI outputs, but unless you have a relatively elaborate home theater with a
If you're looking for more detailed feature comparisons, check out our giant AV receiver spreadsheet, which compares the TX-NR626 with other 2013 models as we review them.
Setup: An odyssey with Audyssey
The TX-NR626 features Audyssey's MultEQ automatic calibration system, which automatically adjusts the receiver's settings based on measurements it takes with the included microphone. We've used Audyssey many times before with difference models of Denon and Onkyo receivers, but this version of MultEQ on the TX-NR626 first starts by sending tones to just the sub, and you're instructed via the onscreen display to manually adjust the subwoofer's volume (on the sub) to 75dB, which we did.