Onkyo HTRC160 Home Theater Receiver review: Onkyo HTRC160 Home Theater Receiver

  • 1
  • 2
  • 3
  • 4

CNET Editors' Rating

3.5 stars Very good
  • Overall: 7.4
  • Design: 7.0
  • Features: 8.0
  • Performance: 7.0
Review Date:
Updated on:

The Good Solid sound quality; five HDMI inputs; relatively inexpensive; onboard Dolby TrueHD and DTS-HD Master Audio decoding; upconverts analog video signal to 1080i; automatic speaker calibration.

The Bad Slightly less power than the TX-SR607; no built-in Sirius support; analog video upconversion is poor; no true graphical user interface; no 7.1 analog inputs; big and boxy design; Dolby Pro Logic IIz doesn't have much audible effect.

The Bottom Line The Onkyo HT-RC160 has nearly all the same functionality as the similar TX-SR607, for about $100 less, making it one of the best AV receiver values of the year.

Editors' Top Picks

Comparing the features of competing AV receivers is already a difficult chore, but many manufacturers, such as Denon and Yamaha, invite more complexity by offering two lines of nearly identical AV receivers: a custom-install-friendly line and a more-consumer-based line. For better or worse, Onkyo has followed suit with the HT-RC160, which is the consumer-friendly analogue to the TX-SR607. As much as we dislike the confusion created by the duplicated models, the HT-RC160 is a good deal. The differences between TX-SR607 and HT-RC160 are simple: no front panel HDMI input, no onboard Sirius support, and slightly less power. Otherwise, they are virtually identical and the HT-RC160 is selling for about $100 less online. The HT-RC160 isn't our favorite midrange receiver (that would be the Pioneer VSX-1019AH-K), but taking value into account, it's the next best choice.

Design
The trend in home audio is to make gear smaller and sleeker, but Onkyo receivers are unapologetically big and bulky, coming in at 17.13 inches wide by 6.94 inches high by 12.94 inches deep. You'll want to leave plenty of space in your home theater rack to fit the receiver, especially since it tends to run hot. The front panel offers the standard assortment of buttons and knobs; the focus is definitely on function over form. We're not picky about aesthetics when it comes to AV receivers, but if you are, you'd probably be better off looking at options like the Sony STR-DN1000 or Pioneer VSX-1019AH.


There's a standard-def video input on the front panel, but no HDMI input, like on the TX-SR607.

The included remote control is the same as last year's and we generally like its simple design. Instead of offering all the functions directly on the remote, the HT-RC160's clicker uses a simpler design that relies more on navigating onscreen menus. While some old-school home theater fans may prefer having all the buttons at their fingertips, we felt like this design was much less intimidating for the average user.

While more AV receivers are starting to feature true graphical user interfaces, the HT-RC160 features a text-based onscreen interface. To be fair, there are some graphics accompanying the menus, but they're comparatively low-fi--although they easily best the onscreen menus of the Yamaha RX-V665BL . Graphics aside, the menus are easy to get around and we didn't run into any snags during our setup. Our one nitpick is that there's no capability to change the upscaling resolution in the menu system; you need to use the button on the remote instead.

Setup
Like all of Onkyo's receivers of recent memory, the HT-RC160 features Audyssey's 2EQ automatic calibration system. The comprehensive system confirms the wiring polarity for each speaker is correct ("+" to "+" and "-" to "-"), adjusts each channel's volume level and time delay/distance setting, determines the speaker "sizes," and the speaker/subwoofer crossover settings. Audyssey 2EQ also provides equalization corrections to the speakers, which may or may not improve the sound. In our case, our Aperion Intimus 4T Hybrid SD 5.1 speaker/subwoofer system was warmer and richer sounding with the EQ turned on. Does that mean better? Not to us, but it's a matter of personal taste.

The 2EQ system uses a microphone to analyze the speakers' and subwoofer's sound from three listening positions in your room. The setup process took about 12 minutes to complete, during which time the receiver sent test tones to all five Aperion speakers and the sub. After each series of tones was completed we were instructed (via the onscreen display) to move the measurement mic to the next room position.

Once the Audyssey 2EQ setup was finished it was easy to confirm the results, which were pretty accurate overall. Speaker and subwoofer measured distances were spot-on, and the volume levels, including the subwoofer, were perfect. We were less happy with the subwoofer-to-speaker crossover settings: Audyssey 2EQ selected 40 Hertz for the towers, 90 Hz to the center-channel speaker, and 60 Hz for the surround speakers.

The settings for the towers and surround speakers were too low (a low setting would result in a lack of midbass). So we changed the towers' crossover to 60Hz and the surrounds crossover to 90Hz in the manual setup. Granted, the sound, even before we made the changes was perfectly fine, but it was a smidge better after we made the changes.

We definitely liked the Audyssey 2EQ setup results overall and recommend taking the time to do the autosetup.

Features

Key features
Dolby TrueHD + DTS-HD MA Yes Onscreen display Text-based
Analog upconversion 1080i Source renaming Yes
Selectable output resolution Yes Satellite radio No

In addition to Dolby Pro Logic IIz, the HT-RC160 has onboard decoding for both of the new high-resolution soundtrack formats, Dolby TrueHD and DTS-HD Master Audio. Analog upconversion is provided up to 1080i, although we really weren't satisfied with the image quality--we'll get to the details in the performance section. The onscreen display for the HT-RC160 is primarily text-based, although there are some basic graphics accompanying the menus. Unlike the TX-SR607, the HT-RC160 lacks Sirius support, although you can add it with a standalone tuner (or a streaming-audio unit that utilizes the online XM Sirius stream).

Connectivity
HDMI inputs 5 Optical audio inputs 2
Component video inputs 2 Coaxial audio inputs 2
Max connected HD devices 8 Stereo analog audio inputs 2
Composite AV inputs 5 Analog multichannel inputs No
Max connected video devices 8 Phono input No

Editors' Top Picks

 

ARTICLE DISCUSSION

Conversation powered by Livefyre

Where to Buy

Onkyo HTRC160 Home Theater Receiver

Part Number: HTRC160

MSRP: $549.00

See manufacturer website for availability.

Quick Specifications See All

  • Response Bandwidth 5 - 100000 Hz
  • Additional Features Audyssey Dynamic EQ
  • Functions AV receiver
  • Sound Output Mode Surround Sound
  • Type AV receiver
About The Author

Covering home audio and video, Matthew Moskovciak helps CNET readers find the best sights and sounds for their home theaters. E-mail Matthew or follow him on Twitter @cnetmoskovciak.

About The Author

Ex-movie theater projectionist Steve Guttenberg has also worked as a high-end audio salesman, and as a record producer. Steve currently reviews audio products for CNET and works as a freelance writer for Home Theater, Inner Fidelity, Tone Audio, and Stereophile.