NetGear WGPS606 54 Mbps Wireless Print Server w/4 Port Switch review: NetGear WGPS606 54 Mbps Wireless Print Server w/4 Port Switch

  • 1
  • 2
  • 3
  • 4

NetGear WGPS606 54 Mbps Wireless Print Server w/4 Port Switch

(Part #: WGPS606NA) Released: Apr 11, 2005
See all prices
3 stars

CNET Editors' Rating

The Good Inexpensive; supports up to two printers; doubles as a four-port Ethernet switch; also serves as a Wi-Fi range extender.

The Bad Not compatible with all printers; setup process is occasionally confusing; lacks extensive printed manual.

The Bottom Line Though it works with only a smattering of printers and can be a chore to configure, this Wi-Fi print server gets the job done.

6.0 Overall
  • Design and ease of use 4.0
  • Features 7.0
  • Performance 7.0
  • Service and support 6.0

Netgear WGPS606 wireless print server

These days, running a Wi-Fi network is cheap and easy. So why is it still such a hassle to share a printer? Unless you connect it to a dedicated print server (or a router with a print server) so that it can operate independently, you have no choice but to leave your printer tethered to a PC that's always on. Enter Netgear's WGPS606 wireless print server with a four-port switch, which enables you to share up to two USB printers (and four PCs) across your existing 802.11b/g Wi-Fi network. While the device isn't intended to take the place of your existing Wi-Fi router, you could easily mistake it for one. Rather, it's a wireless print server that doubles as a four-port Ethernet switch and a Wi-Fi bridge. It's a great idea, and the WGPS606 costs less than some standalone print servers that support only one printer. However, two fairly important issues threaten to spoil the party: configuration and compatibility.

Before you even consider buying the product, make sure the WGPS606 wireless print server supports your printers. According to information on Netgear's Web site (found only in the support section, not the main product page), only about a dozen laser printers and 40 inkjets will work with it. While many popular models made the cut, many others didn't, so it's essential that you check first. We performed our tests with an Epson Stylus Photo 1280 inkjet and an HP LaserJet 1022 . The latter doesn't appear on the list of compatible printers, but the nearly identical LaserJet 1012 does, so we decided to try our luck. According to Netgear's site, "Other printers may be compatible."

Configuration promised to be easy enough, thanks to the included software CD, which offers a pair of wizards: one to set up printers, the other to set up PCs for printing. Alas, we immediately encountered a host of minor obstacles, not the least of which was incomplete documentation. For starters, the primary wizard initially failed to detect the print server, suggesting that we double-check the connections and turn off any installed firewalls. After disabling Windows XP's firewall (good thing we knew how), it detected the print server immediately. Later, a screen appeared telling us to "reserve the selected IP address" in our router's settings, with no further explanation.

The process of setting up a PC to access a shared printer can be vexing as well. The WGPS606's wizard instructs you to install the printer's drivers on each computer, but that's not always possible. In the case of the LaserJet 1022, for instance, the driver needs to detect the printer before it can complete its installation. In most printer-sharing configurations, a remote computer can pull the necessary drivers from the host PC. Why not here?

Editors' Top PicksSee All

 

Discuss NetGear WGPS606 54 Mbps Wireless Print Server w/4 Port Switch

Conversation powered by Livefyre