This product was released prior to the final ratification of the 802.11g standard, but firmware upgrades for most 802.11g draft-based products are now available that bring older products up to the final spec. Often these upgrades include other enhancements, such as improved security features for stronger encryption. Check the manufacturer's support site for firmware upgrades and look for firmware posted after June 15, the date that 802.11g was ratified.
Once you get all of the hardware and the cables connected, you can configure the access point using the easy-to-navigate Web-based configuration tool, which presents you with a split screen. On the right-hand side of the screen, you'll find a brief definition and explanation of each of the settings on every page. This unique feature sets Netgear apart from its competitors and spares you from flipping through the manual every five seconds.
External antenna connector.
Still, the WG602 offers a few interesting features. For example, it comes with a handy rubber stand for vertical placement, while two slots on the bottom let you easily mount the device on a wall or a ceiling. There's also a reset button that lets you quickly return the access point to its default settings should you forget your password. But the WG602's detachable antenna on the back panel really distinguishes it from some of its competitors. You can remove the 2dBi omnidirectional antenna to expose a standard, reverse SMA connector. And while the WG602 offered excellent range in CNET Labs' tests with its default antenna, the external connector lets you screw on a directional antenna and extend your range into any hard-to-reach area.
The Advanced Settings screen lets you adjust the beacon interval, the RTS threshold, the fragmentation length, and the DTIM interval.
Like most 802.11x-based gear on the market today, the WG602 comes up a bit short on security. It offers the standard 64- and 128-bit flavors of WEP encryption, but it lacks the dynamic keying mechanism offered by Wi-Fi Protected Access (WPA), and the authentication capabilities of 802.11x. On the upside, Netgear says that the device will support both WPA and 802.1x with a future firmware upgrade. You can also deny or allow network access to wireless computers based on its MAC address, as well as adjust the beacon interval, the RTS threshold, the fragmentation length, and the DTIM interval. Unfortunately, the WG602 lacks the bridging capabilities found on the Apple AirPort Extreme, which let you extend a network without Ethernet wiring or connect two wireless LANs.
The Netgear WG602 54Mbps wireless access point beat the competition in both g-only and mixed-mode (802.11b and 802.11g) environments. At five feet, its maximum throughput clocked in at 20Mbps, a tad slower than the best 802.11a access point we've tested, but fast enough to satisfy 802.11g's promise of comparable speeds. It also makes good on another promise: range. In CNET Labs' tests, the WG602 delivered 12.3Mbps at 75 feet, about three times the throughput of an 802.11b device sitting right next to the access point.
In mixed mode, throughput dropped down to mostly 802.11b levels, with an occasional short-lived 802.11g burst in speed. At the fringes of its range, the WG602 favored the transmissions of our 802.11b client, running the 802.11g transmissions into the ground. Still, we achieved good range in both g-only and mixed-mode environments.
For practical throughput tests, CNET Labs uses NetIQ's Chariot 4.3 software with Chariot 4.4 Endpoints as its benchmark. For wireless testing, the clients and the routers are set up to transmit at various distances from the access point and to automatically select the best transmission speed. All tests are run with Chariot software using TCP and are run in CNET offices over channel 11. Our tests indicate the range that you can expect in a typical office environment, but the range in your own home or office may differ. You may be able to achieve better performance in situations where you can establish a clear line of sight. For more details on how we test networking devices, see the CNET Labs site.
Netgear backs the WG602 54Mbps wireless access point with a respectable three-year warranty and toll-free, 24/7 phone support. The company's Web site offers the usual FAQs, firmware updates, e-mail tech support, and searchable knowledge base. Netgear also offers a Premium Networking Support Service, which helps small- and home-office users solve security, software, and other network issues. The fee-based service starts at $1.99 per minute or $28.95 per incident and includes several different pricing packages. Finally, the Web site features a section called Mentor For Networking, which offers a series of educational videos to help you set up your home network and perform other tasks, such as sharing a printer.
The Netgear Web site offers the usual spattering of FAQs and firmware updates.