Netgear Powerline HD review: Netgear Powerline HD

  • 1
  • 2
  • 3
  • 4

CNET Editors' Rating

3.5 stars Very good
  • Overall: 7.2
  • Design and ease of use: 7.0
  • Features: 7.0
  • Performance: 8.0
  • Service and support: 6.0
Review Date:
Updated on:

The Good The Netgear Powerline HD Ethernet Adapters are simple to set up and configure, and the fast throughput will let you stream HD video without a hitch. And you can use a switch with the adapters, which means you network multiple devices off a single adapter.

The Bad The adapters are rather expensive, and you're hardly cutting cords by using wired adapters. Phone support for anything more complicated than basic installation is expensive.

The Bottom Line Simple to set up and able to provide ample throughput, Netgear's Powerline HD Ethernet Adapters are a great solution for anyone who wants the benefits of home networking but doesn't want to rewire the entire house or mess with Wi-Fi. Be forewarned, though: it's not an inexpensive solution.

Editors' Top PicksSee All

If you're Wi-Fi shy but don't want to give up on the idea of streaming content around your house, check out the Netgear Powerline HD Ethernet Adapter. It's simple to use, and the throughput is high enough to stream high-definition video without a glitch. The downside is that the adapters aren't cheap: each one will run you about $100. And despite the fact that you don't have to run Ethernet cable through your house, as you would with a regular wired home network, you'll still have to deal with a potential rat's nest of wires around each adapter. Still, you'll save on the expense of rewiring your house for Ethernet. And the Netgear adapters are faster and cheaper than the similar Panasonic HD PLC Ethernet adapters.

Power-line technology uses a building's existing electrical wiring to convey digital data. The wiring serves as the network, and each electrical outlet serves as a node. The electrical current won't interfere with your data network because electricity and data are transmitted at very different frequencies. The setup of every home power-line network is very similar: connect the first adapter to your router and an outlet, then plug in each additional power-line adapter anywhere you want connectivity and connect a client to that adapter via Ethernet cabling. Voilà, you have a power-line network. Obviously, you'll need at least two adapters to create a network, and Netgear sells a starter kit that contains exactly that: two adapters and two 6-foot Ethernet cables. Though the inclusion of the cables seems like a no-brainer, Panasonic doesn't include them with its power-line adapters, so kudos to Netgear.

Netgear's Powerline adapters are glossy white bricks with nothing but electrical prongs jutting out the back, an Ethernet port on the side, and three tiny LEDs on the front. Unlike the Panasonic adapters, the Netgear brick plugs straight into a wall outlet, with no additional power cord. While we like the tidiness of this solution, it could potentially interfere with other large wall warts (that is, power bricks) you have in the outlet. And you can't plug the adapter into a power strip or an extension cord, either, because those devices may actually strip the data from the electrical wires.

Setting up a power-line network with the Netgear kit couldn't be simpler: connect the adapter to one of your router's LAN ports via Ethernet cable and plug in that adapter. Take the second adapter anywhere in your home and plug it into an outlet. It may take up to 30 seconds for the adapters to establish contact. Then, using another Ethernet cable, connect a client device to the second adapter. You don't have to register each "slave" adapter to the "master" as you do with the Panasonic power-line adapters; they'll configure themselves automatically. Nor do you need an adapter for each device you want to network: you can connect a switch to a power-line adapter and connect as many devices to the switch as it will support. For example, a single adapter and switch in your living room could support a DVR, a media adapter, a set-top box, and a notebook PC. Unfortunately, you will still have to contend with an unsightly tangle of cords and cables. Netgear recommends a maximum of 16 adapters per network.

Editors' Top PicksSee All

 

Join the discussion

Conversation powered by Livefyre

Where to Buy See all prices

Netgear Powerline HD Ethernet Adapter

Part Number: HDX101 Released: Jul. 8, 2006
MSRP: $120.00 Low Price: $129.00 See all prices

Quick Specifications See All

  • Release date Jul. 8, 2006
  • Data Transfer Rate 200 Mbps
  • Data Link Protocol Ethernet
  • Connectivity Technology wired