NEC-Mitsubishi MultiSync LCD1770NX
The NEC-Mitsubishi MultiSync LCD1770NX has a number of great features and it's well designed, and if that were all that mattered, it would be a great display for office and home users alike. Unfortunately, what's plain as the nose on our Labs technician's face is the 1770NX's disappointing image quality. For about the same price, you can get a better LCD, such as the , or at the very least, you can get away with paying less for an LCD of similar quality, such as the .
The LCD1770NX makes a great first impression. It's framed by an unobtrusively skinny bezel. Along the bezel's bottom edge are four rectangular adjustment buttons that launch and exit the onscreen menu and switch between analog and digital inputs. A tiny joysticklike wand handles intramenu navigation and makes adjusting the image easy and fun. There are five USB ports located on the back of the panel--one upstream and four downstream--and one USB cable is included, along with an analog signal cable.
The LCD1770NX inhabits a sparsely populated middle ground between highly adjustable LCDs and those with nary an articulation point to be found. Its base has a lazy Susan that allows for nearly 360 degrees of side-to-side swivel--an excellent range of motion that makes it easy for workers in open-plan office environments to share their creations. The neck can be raised four inches to accommodate users of varying heights, and the panel tilts about 30 degrees back and forth. The panel can be attached to a VESA wall mount, but it'll require some unscrewing. The only adjustment option not included is a Portrait/Landscape pivot. This feature is usually found in larger LCDs, though some 17-inchers, such as the , can make the switch to Portrait mode. Where most LCDs have a straight up-and-down neck, the LCD1770NX's curves forward. This doesn't seem to serve any particular purpose, except make it hard to raise and lower the panel. The telescoping action is stiff, the angle is a bit awkward, and the base wobbles and kicks up a lot when you try to adjust the height.
NEC-Mitsubishi has put quite a bit of thought into the cable-feed system, something neat freaks are sure to appreciate. There are three plastic loops on the back of the display where the neck meets the panel and two more loops alongside the neck. The loops vary in size, so some of them can accommodate more or thicker cables. Once you have the cables all tucked in, you can snap the plastic cover over the back of the neck to cover everything up.