Just slightly larger than a 3.5-inch internal hard drive, the LaCie Minimus is easily the most compact desktop external hard drive to date. Despite its small size, it runs fast and cool even during heavy loads. The sleek aluminum housing also helps the drive fit on any computer desk.
On the downside, the Minimus doesn't include a USB 3.0 add-in card for desktops that don't yet support USB 3.0. If your computer already has USB 3.0, at $130 for 1TB (or $195 for 2TB), the LaCie Minimus is a good bet. Otherwise, you should also check out the WD My Book 3.0 or the Seagate GoFlex Desk.
Design and features
|Drive type||3.5-inch external USB hard drive|
|Connector options||USB 3.0, USB 2.0|
|Size (WHD)||4.4 x 1.2 x 6.8 inches|
|Available capacities||1TB, 2TB|
|Capacity of test unit||1TB|
|OSes supported||Microsoft Windows (XP, Vista, 7), Mac OS 10.5 or later|
|Software included||LaCie Setup Assistant; LaCie Backup Assistant (PC and Mac), 10GB Wuala Secure Online Storage (1 year included)|
The LaCie Minimus USB 3.0 is a frills-free external hard drive, coming in LaCie's typical squarish shape. The drive has nothing but the LaCie logo on the front. On the back, it has a Mini-USB 3.0 port, the power port (the drive requires a separate power adapter to operate), and an on/off switch. On top, at the back, the drive has one blue LED light that shows the power status of the drive and flashes to show the activity of the internal disk.
The drive has a sleek-looking aluminum casing and two long rubber feet at the bottom. These feet are very effective at keeping the drive grounded, and the casing helps dissipate the heat, keeping the drive cool even during heavy loads.
The Minimus comes with the drive itself, the power adapter and a Mini-USB 3.0 cable. These are all you need to get the drive up and running.
Unlike other external hard drives that are normally preformatted in NTFS (Windows), HFS+ (Mac), or FAT32 (for both Windows and Mac, with file sizes limited to 4GB or less), the Minimus comes with a 100MB temporary partition that contains LaCie Setup Assistant software. The software prompts you to run it the first time you plug the drive into a computer and offers to format the drive into either NTFS or HFS+.
Once you have chosen, the software then quickly formats the drive and makes all of its capacity available to the platform of your choice. Note that you'll need to make sure you pick the right one, as the formatting process will erase the temporary folder, along with the LaCie Setup Assistant. If you change your mind later, you'll need to do the formatting manually, which is relatively easy.