X

Photos: Donald's Daisy DIY MP3 player

I spent some time last weekend putting together my own MP3 player using the Teuthis/Make Daisy DIY MP3 player kit. Here are some photos documenting the construction.

Donald Bell
Donald Bell has spent more than five years as a CNET senior editor, reviewing everything from MP3 players to the first three generations of the Apple iPad. He currently devotes his time to producing How To content for CNET, as well as weekly episodes of CNET's Top 5 video series.
Donald Bell
529003007_440.jpg
1 of 16 Donald Bell / CNET Networks
I figured I'd mount volume controls to the side of the case and wire playback controls to the ancient original keypad.
528886544_440.jpg
2 of 16 Donald Bell / CNET Networks
The PIC18F45j10 microchip is a PIC microcontroller that does a lot of the dirty work on the Daisy.
529011249_440.jpg
3 of 16 Donald Bell / CNET Networks
It looks ridiculous, I know, but the sound quality is stunning. Plus, you can hear the love that went into this thing. I wired the keypad so that buttons 4, 5, and 6 control rewind, play/pause, and fast-forward, respectively.
528981823_440.jpg
4 of 16 Donald Bell / CNET Networks
First step (and the hardest) was surface mounting the small VS1011 chip in the top left corner. The VS1011 chip is an MP3 decoder, digital/analog converter, and headphone amplifier all in one little package. The tiny little pins were hard to line up straight, but it's close enough for rock 'n' roll. After that, I put down the resistors.
528916442_440.jpg
5 of 16 Donald Bell / CNET Networks
Aside from the fact that I'll have to keep the back open, it's a perfect fit! After all that work, it's hard to describe how exciting it was to hear music come out of this thing that was just a pile of parts a few moments ago.
528884074_440.jpg
6 of 16 Donald Bell / CNET Networks
Before getting started, I warmed up the soldering iron and laid out all the parts.
528894276_440.jpg
7 of 16 Donald Bell / CNET Networks
Next came the headphone jack (bottom right) and the SD flash memory card slot (bottom left). The Daisy plays music formatted as either MP3 or WAV files loaded onto FAT32-formatted SD or MMC flash memory cards.
528902378_440.jpg
8 of 16 Donald Bell / CNET Networks
An MP3 player is only as good as its enclosure. My 1978 "Little Professor" calculator game needed an upgrade, and the Daisy just barely fit.
528970897_440.jpg
9 of 16 Donald Bell / CNET Networks
This is a shot of the board before any of the components have been soldered on. The Daisy kit was designed by a San Francisco-area group called Teuthis and marketed under the Make Magazine brand name. The board measures 3 inches square.
528907894_440.jpg
10 of 16 Donald Bell / CNET Networks
Figuring out how to take advantage of the original Little Professor keypad was no easy feat. I used a multimeter and a lot of patience to determine how the leads worked together.
528987385_440.jpg
11 of 16 Donald Bell / CNET Networks
Here's a shot of me pushing the PIC18F45j10 microchip into place. Hold your breath and pray you don't hear any sharp, snapping sounds.
528900416_440.jpg
12 of 16 Donald Bell / CNET Networks
Here's a shot of the Daisy powered up and playing for the first time. The default volume is fairly restrained, though, so to get things cranked up, we'll have to wire some volume controls to the function pins on the bottom of the board.
529013571_440.jpg
13 of 16 Donald Bell / CNET Networks
Most commercial electronics use components that are shrunk down to nanosize blobs. This is not the case for the Daisy. Everything is big and beautiful on this board.
528986571_440.jpg
14 of 16 Donald Bell / CNET Networks
I popped in some fresh AAA batteries and connected the pack to the board.
529004153_440.jpg
15 of 16 Donald Bell / CNET Networks
You can customize the Daisy's volume control to be just about anything you want. For the sake of space, I used some switches from my personal stash to create a unique volume control. The red button will increase or decrease volume based on whether the switch is in the up or down position.
528920918_440.jpg
16 of 16 Donald Bell / CNET Networks
To get the battery pack to stay put, I used some industrial double-sided tape.

More Galleries

My Favorite Shots From the Galaxy S24 Ultra's Camera
A houseplant

My Favorite Shots From the Galaxy S24 Ultra's Camera

20 Photos
Honor's Magic V2 Foldable Is Lighter Than Samsung's Galaxy S24 Ultra
magic-v2-2024-foldable-1383

Honor's Magic V2 Foldable Is Lighter Than Samsung's Galaxy S24 Ultra

10 Photos
The Samsung Galaxy S24 and S24 Plus Looks Sweet in Aluminum
Samsung Galaxy S24

The Samsung Galaxy S24 and S24 Plus Looks Sweet in Aluminum

23 Photos
Samsung's Galaxy S24 Ultra Now Has a Titanium Design
The Galaxy S24 Ultra in multiple colors

Samsung's Galaxy S24 Ultra Now Has a Titanium Design

23 Photos
I Took 600+ Photos With the iPhone 15 Pro and Pro Max. Look at My Favorites
img-0368.jpg

I Took 600+ Photos With the iPhone 15 Pro and Pro Max. Look at My Favorites

34 Photos
17 Hidden iOS 17 Features You Should Definitely Know About
Invitation for the Apple September iPhone 15 event

17 Hidden iOS 17 Features You Should Definitely Know About

18 Photos
AI or Not AI: Can You Spot the Real Photos?
img-1599-2.jpg

AI or Not AI: Can You Spot the Real Photos?

17 Photos