Welcome to Nissan's enormous car manufacturing plant in Sunderland, UK. Built in 1984 and first put into operation in 1986, this vast factory sees highly trained workers paired with finely tuned robots to create up to 113 cars every hour. It was the first UK plant in history to reach the 1 million mark with a single model -- the Nissan Qashqai.

The Qashqai, JukeNote and the all-electric Leaf are all produced here. Thanks to a strict eye on efficiency and state-of-the-art mechanised production lines, all models can be built alongside each other.

Click through the gallery and see how Nissan's cars go from being a huge lump of metal to driving off the production line.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

The tour begins here. These heavy steel doors lead onto the factory floor. Safety gear is a must, and I had to wear ear defenders at all times.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

"This person is responsible for your safety." This won't end well for any of us.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

The car's bodywork begins here in the "press shop", as these massive, several-tonne rolls of metal.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

A crane picks the rolls up and transports them to the giant presses that stamp the shapes into the metal.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

The workers are, I'm sure, quite glad they don't have to roll these things around by hand.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

These individual sheets of metal are stamped to form smaller body panels or internal parts.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

The panels are picked up by robots using suction cups and moved into position.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

This is just one of the giant machines that press the body panels into shape.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

The machines are capable of pressing with up to 5,000 tonnes (over 1 million pounds) of force. I suggested using it to compress coal into diamonds, but apparently that's frowned upon -- they love their coal here in the North East.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

The smaller parts that come off the press are checked over by hand.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

A close eye for detail is crucial.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

Any imperfections are marked before being sent back.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

It's difficult to get a sense of just how big this factory is.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

The plant is split into three main areas -- body assembly, paint and final assembly -- each of which contain various different stages of production.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

There are 6,752 people currently employed by Nissan in the Sunderland plant. Here are just some discussing, I presume, 21st century car manufacturing.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

In here is where the giant press squashes the metal panels into shape. Don't reach in suddenly, it won't end well for you.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

This several-tonne lump of metal is actually a new press head being moved into position to create different shaped panels.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

This is one of the suction cups that allows the robots to clamp on to a sheet of metal.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

These vast warehouses store row upon row of car parts. It's like going into an enormous shop, except the only things you can buy are car parts and they're not actually for sale.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

This trolley drives itself around, following the black marking tape on floor. It picks up finished panels and deposits them in the storage rooms before returning for more.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

Sometimes the sunlight pours in from open shutters on the roof and makes the working day that bit more beautiful.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

These panels aren't heavy at this stage and are popped into place by humans before the robots start doing their stuff.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

An army of robot arms spot-weld the panels together. It's hypnotic to watch.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

The robots are able to perform the welds more accurately and faster than human hands.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

Although there's quite a lot of sparks flying around, the machines are designed to create as few sparks as possible -- sparks mean wasted energy, my Nissan guide explained.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

The car shells are then transported to the next stage on these tracks above the factory floor.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

You can just walk around the tracks as the cars pass. You really have to keep your eye on where you're going though -- if I was to fall and hold it up, the entire production process would be delayed.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

The skeletons -- in particular, the welding points -- are all thoroughly checked over...

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

...by hitting them with a hammer. Apparently it's the best way to check if everything has been properly stuck together.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

If you wander far enough around the vast complex, you can find some beautiful sights.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

Although it's very easy to get lost if you don't have a guide.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

"Robot training cell" isn't just a great name for a rock band, it's where the robots are programmed with new manoeuvres for crafting new car models.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

113 cars are made every hour by the Sunderland teams.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

The plant is operational 24 hours a day, with different teams working different shifts throughout the week.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

Here's another autonomous cart taking doors to be attached.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

The plant operates using a "just in time" production method, meaning that components are only made and brought over as and when they're needed. This method requires all parts of the factory to work in strict cooperation, but means that huge stocks of spare parts aren't required.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

More bits and pieces are securely bolted to the cars before they leave the body shop.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

For those of you not up on your British geography, Sunderland is a city of 175,000 people in the North East of England, near the larger city of Newcastle. It has a proud manufacturing tradition -- people from Sunderland are known as "Mackems", reputedly from the local pronunciation of "make 'em". It should be noted that it's not usually this sunny.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

This is the stage where the doors are attached. It's an important stage, unless you really like fresh air.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

Make sure it's on good and tight, please.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

These robots are responsible for crimping metal edges. It's incredibly precise work, but these arms are capable of performing it at speed.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

The plant employs teams of people whose job it is to monitor the efficiency of the workers. It's not to pick out anyone who's not pulling their weight, but to see if there are easier ways of doing things -- does a worker need to walk that 6 feet to his tool chest, or could that be alongside him? Why have the worker bend over to pick something up when it could be placed at waist height?

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

On the bonnet goes...

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

...and a check over for any imperfections.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

The cars are on a continuous track that keeps on moving as they're assembled throughout the plant.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

Another autonomous cart. This one is able to move alongside the workers as they follow the cars, ensuring they always have the tools they need.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

Thankfully this sickly green is not their final colour -- it's just a coating that will help the final paint stick properly.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

This sealer is applied by hand. It takes a lot of practice to be able to apply it accurately and consistently in the tight time-frames the workers have to stick to.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

The sealer is then spread out across the joins in the panels.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

Robot arms then apply paint to the difficult to reach sections beneath the car.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

As a natural button-pusher, I was consistently having to fight urges to touch things the whole way around my tour.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

Still on their tracks, the cars are then brought through this tube, which looks suspiciously like a research lab that would house a crashed UFO.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

Sadly, I found no aliens, but I was able to see the teams highlight any areas where the primer paint hadn't taken properly.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

It's sanded away by hand and then marked with a sticker to be reapplied before the final coat is put on.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

The cars are then taken through these dusters. They're similar to the big rollers in a car wash, but they're made from ostrich feathers and are designed to dust off any detritus that may cause imperfections in the paintwork.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

The paint is then applied by hand using giant spray guns. The workers wear boiler suits hooked up to respirators so their lungs don't fill with paint.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

I was able to hold my breath, sneak inside and grab some pictures -- with mild concern for getting my expensive camera clogged up with paint particles. It seemed fine.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

This mass of light tubes is to help the inspection teams check for even the tiniest errors in the paint application.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

This guy then uses his smaller paint gun to paint awkward places like inside the wheel arches.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

Heat lamps are then applied to help dry the paint before the cars move on.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

It's at this stage where I nearly brushed against a still-wet car, almost completely ruining the paintwork and meaning it would have had to go through the whole process again. I wouldn't have been too popular.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

More robot arms pick the car up from the paint shop and move it on to the trim and chassis shop -- that's where all the internal bits of the car are put into place.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

This is one of the batteries that slots inside the all-electric Nissan Leaf. The batteries are made on-site  as well, but it's a closely guarded secret and Nissan wouldn't let me see. Boo.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

*BEEP BEEP* If you don't get out of the way, things can get really bad, really fast.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

This assembly line is where the doors are fitted with the windows as well as the electronics and motors to make them move up and down.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

All the crucial electronics are threaded throughout the cars.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

The centre console -- including the wheel, dashboard and all the knobs and buttons to operate the heating and stereo -- is delivered as one piece.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

It can simply be inserted into the car.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

As with the rest of the components, the centre console is delivered just in time for each car by automated trolleys.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

The windshield is put into place and sealed around the edges.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

Nissan makes everything on site, including the engines. There's a casting factory where the cylinder heads are made, but I sadly wasn't allowed inside.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

This endless line of tiny components would be extremely confusing to understand, but green lights appear above each box as the worker pushed the trolley down the alley so they know exactly which pieces to take.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

Good to know.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

Items like the fuel tank, oil tank and other crucial bits and bobs are put into place.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

The electric batteries are inserted into the Leafs (Leaves?).

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

They're heavy, so a helpful robotic platform does the lifting.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

All the other parts, like indicators, head lights, bumpers and brake lights are attached and connected.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

The wheels are delivered on this cool lift.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

They're popped into place, then a chap with what looks like a terrifying laser weapon secures them in place.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

Don't forget the front ones.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

The strength of these machines means it's much less likely your wheels are going to suddenly fall off while you're driving along.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

The cars are pretty much finished by now. The seats are inserted and they're fed petrol, oil and other things needed to make them run.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

They need fuel to be able to drive off the production line.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

The coats of paint receive one final inspection under bright lights. They're so shiny.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

Finally, every car off the line has its headlights, brakes and horns tested.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

Every single car goes through the procedures to ensure that no errors have been made along the way.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:

And here's one of the finished models, sat happily in the sun, among some of the 10 wind turbines Nissan has on-site.

Published:
Photo by: Andrew Hoyle/CNET / Caption by:
Hot Galleries

Last-minute gift ideas

Under pressure? These will deliver on time

With plenty of top-notch retailers offering digital gifts, you still have time to salvage your gift-giving reputation.

Hot Products