Simple TV back panel

On this inexpensive television, the back panel has two HDMI inputs (upper right), one component (green, blue, and red), and an antenna input. The optical connection is an output. The "IR Blaster" is so this TV can control other devices.

How to Set up an HDTV

Updated:
Photo by: Geoffrey Morrison / Caption by:

Advanced TV back panel

This is a slightly more advanced TV's back panel. On this particular TV, the HDMI inputs are on the side. The PC input is the same connection found on most computers, also known as RGB-PC or D-Sub 15. Check your TV's owner's manual to find out what resolutions this input can support (if so equipped). It may not be 1,920x1,080. The "Video In 1" is the composite input, and is not HD.

Check out HDMI vs. DisplayPort vs. DVI vs. VGA: Which connection to choose? for more info.

Updated:
Photo by: Geoffrey Morrison / Caption by:

Blu-ray player back panel

Most new Blu-ray players will only have HDMI and composite (standard definition) video outputs. Don't be fooled by the cables included with the player. The yellow composite cable should not be used as it is not HD. The LAN connection is for your home network. Many new Blu-ray players are also equipped with Wi-Fi, and don't need a physical Ethernet connection like this.

Updated:
Photo by: Geoffrey Morrison / Caption by:

An HDMI Cable

The plug for an HDMI cable.

There's no such thing as "4K HDMI" cables.

Updated:
Photo by: HDMI.org / Caption by:

HDMI inputs

All HDMI inputs should work the same (except with 4K, see below). Many new TVs allow for labeling of inputs, so you can set "Input 1" as "Cable" or "Input 2" as "Blu-ray." You could label Input 3 as "Bob" if you want to confuse people. You know, for fun.

In case you're wondering, "ARC" stands for Audio Return Channel. It allows this particular input to send audio back to an AV receiver over the same HDMI cable that is carrying video from the receiver to the HDTV. That's useful if you're using your HDTV's over-the-air tuner or perhaps one of its built-in streaming media services (such as Netflix or Amazon VOD), and want to listen with your surround-sound system. The receiver--or sound bar or home theater system or whatever--must also support ARC for this feature to work (more info).

Not all HDMI inputs on 4K TVs will work with all versions of 4K. Check out HDMI 2.0 and HDCP 2.2 for more info.

Updated:
Photo by: Geoffrey Morrison / Caption by:

Component cables

These are component cables. Note they have red, green, and blue coloring. They're also labeled Y (green), Pr (red), and Pb (blue). These three cables are all for video. Audio has to be hooked up separately.

Updated:
Photo by: Geoffrey Morrison / Caption by:

Component input

A common mistake with component cables is accidentally plugging a cable into the wrong input jack (i.e., red to blue or blue to green). If your picture has weird colors, or you're not getting a picture. Double-check that each output is going to its corresponding input.

Updated:
Photo by: Geoffrey Morrison / Caption by:

Composite cable with stereo analog audio cables

The dreaded composite cables. This is a single yellow cable for video, and a pair of analog audio cables (red and white). As mentioned in the text, composite is standard definition only.

Updated:
Photo by: Geoffrey Morrison / Caption by:

Composite input with stereo analog audio input

These are composite inputs. You should never use them. OK, not never. Hardly ever. Old VCRs and the Nintendo Wii are the only sources you're likely to have that can use composite. Even the Wii can look better if you upgrade to component cables.

How to Set up an HDTV

Updated:
Photo by: Geoffrey Morrison / Caption by:
Hot Galleries

CNET's Holiday Gift Guide

'Tis the season for a gadget upgrade

Check out these 8 tablets you'll want to bring home for the holidays.

Hot Products