3D Printer Build Week: Days Three and Four (photos)
With our printer assembled, we're ready to get started with software, calibration, and, hopefully, printing something cool.
3D printing workstation
Here's our setup. The Mosaic 3D printer requires two power supplies, which are the two small boxes to the immediate left of the printer. We rigged up the spool for the plastic filament from some old laptop battery life testing hardware.
Mosaic source files
Here are the main downloads we needed to track down to line up the software side of our printer. MakerGear's getting started guide does a reasonably good job of walking you through, but you will also need to do some Googling to rectify MakerGear's download list with different versions of the above programs that you will run into.
Pronterface
MakerGear recommends using a program called Pronterface, part of a larger software package called Printrun, to operate the Mosaic printer from your Windows desktop. I wouldn't say Pronterface is idiot-proof, but it's more or less intuitive enough that an experienced computer user shouldn't have too much trouble.
Skeinforge
Skeinforge works in conjunction with Pronterface, and it's in this program where you can fine tune your printer settings. We didn't explore these settings in depth for the sake of time, but the variables you can change in terms of print speed, extruder temperature, and other settings give you a powerful, and daunting, degree of tweakability.
The Knife Assistant
We used Michael "ThePlanetMike" Bowers' Knife Assistant design as a test print.
Brian Emerson's Bucket O' Octopi
We tracked down Brian's design for our final test print.
ReplicatorG
ReplicatorG is another 3D-printing front-end application, similar to Pronterface, but it seems to be more powerful. We used it to scale the octopus model to fit our Mosaic printer's build area.
Octopus in progress
It took some trial and error, but eventually we got a clean build of Brian Emerson's Bucket O' Octopi design.
Gabe Weintraub's Printable Pig
Gabe kindly submitted his design as a possible test print. He warned me that it required a lot of support material, an element of 3D printing we didn't really explore. Designs with big overhanging elements, like the pig's wings, won't print correctly without some kind of support structure because of the molten plastic. For the sake of time we opted for Brian's octopus design, but Gabe's design helps us illustrate how support could be important.
Bucket O' Octopi
Our final print was almost perfect.
More Galleries
My Favorite Shots From the Galaxy S24 Ultra's Camera
My Favorite Shots From the Galaxy S24 Ultra's Camera
20 Photos
Honor's Magic V2 Foldable Is Lighter Than Samsung's Galaxy S24 Ultra
Honor's Magic V2 Foldable Is Lighter Than Samsung's Galaxy S24 Ultra
10 Photos
The Samsung Galaxy S24 and S24 Plus Looks Sweet in Aluminum
The Samsung Galaxy S24 and S24 Plus Looks Sweet in Aluminum
23 Photos
Samsung's Galaxy S24 Ultra Now Has a Titanium Design
Samsung's Galaxy S24 Ultra Now Has a Titanium Design
23 Photos
I Took 600+ Photos With the iPhone 15 Pro and Pro Max. Look at My Favorites
I Took 600+ Photos With the iPhone 15 Pro and Pro Max. Look at My Favorites
34 Photos
17 Hidden iOS 17 Features You Should Definitely Know About
17 Hidden iOS 17 Features You Should Definitely Know About
18 Photos
AI or Not AI: Can You Spot the Real Photos?