The ShareCenter DNS-325 is an upgrade to D-Link's 3-year-old DNS-323 , and for the most part, it makes a worthy upgrade. However, compared with other recent two-bay NAS severs, the new D-Link is still behind in terms of features and ease of use.
The new server offers fast performance, is easy to set up, and it supports RAID 1 and RAID 0 with the ability to switch between the two very fast. If you're looking for a simple workhorse NAS server for your home, at a street price of around $180 (no storage) or $300 (1TB included), the DNS-325 makes a decent investment. For more features and better remote access, we'd also recommend the Synology DS710+ and the Iomega StorCenter ix2-200 .
Design and ease of use
Measuring 4.1 x 7.8 x 5.2 inches, the ShareCenter DNS-325 shares the same simple and practical design as the DNS-323 with the two drive bays being accessible from the front. Just slightly lift the face-lid of the server up and you have full access and can install the hard drives without any tools. To remove them, you'll have to pull the latches on the back of the server, which help push the drives out.
Also on the back, the server has just one Gigabit Ethernet port and one USB port. The USB port can be used to either host an external hard drive for additional storage or a printer. Note that most other servers we've reviewed offer two or more USB ports.
The DNS-325 supports any standard 3.5-inch SATA hard drives, as long as they are of 2TB or lower capacities. While the server recognizes 3TB hard drives, in our trials, it was able to see them only as 750GB drives. The hard drives can be configured in either RAID 0 or RAID 1. You'll also have the options to use them as separate volumes or put them together in a simple JBOD setup. In our trials with two 2TB hard drives, the server could create a RAID configuration within just a few minutes, which is very fast. Other servers would take hours to do the same job. This is likely because the DNS-325 automatically skips disk checking during the RAID build, which might subsequently pose problems, especially in a RAID 0 setup, if one of the disks has bad sectors. There's no option to perform a "slow" and safe RAID build, however.
The DNS-325 comes in two configurations, one with no storage and the other with a 1TB hard drive included. We'd recommend the former as it gives you the freedom of getting your own hard drive, and you should get the largest according to your storage needs. This is because once set up, there's no way you can upgrade the hard drives without having to rebuild the RAID.
Setting up the DNS-325 is easy, though there are quite a few steps, especially when you choose to get your own hard drives. Nonetheless, it's very easy. Most advanced users can figure this out themselves, and novice users can just follow the included setup software, which walks you through the process step by step. We were able to get the server up and running with two 2TB hard drives within about 20 minutes, including the time spent for the RAID setup to be built.
After that, you can use the included D-Link Easy Search Utility to launch the server's Web interface that allows you to further customize the server. Alternatively, you can get to this Web interface by pointing a connected computer to the server's IP address, which is automatically assigned by the network's router (DHCP server).
Considering it's been a long time since the DNS-323 was released, the DNS-325 is rather behind in terms of features and ease of use compared with recent NAS servers. The server doesn't offer an easy way to access its data remotely, it has no support for an IP camera, and there's no self-downloading capability. Its network sharing is also limited: you can create only one share folder per volume, and you can't change the name of this share folder.
To be fair, however, it does include many things home users look for in a NAS server, including the ability to work as a media-streaming server, and an FTP and Web server. It supports Time Machine backup, and it has the ability to share photos and host blogs over the Internet. However, all of its advanced features require a little networking know-how to figure out. Home users can only set the server up as a simple network storage device that hosts streamable content.