Windows 7 forum

Question

Windows 7 & XP networking

by CN5 / February 26, 2013 11:25 AM PST

I understand there issues involved in networking 7 & XP machines. Since I have no choice, can it be done and if so, how? Thanks much!

Answer This Ask For Clarification
Discussion is locked
You are posting a reply to: Windows 7 & XP networking
The posting of advertisements, profanity, or personal attacks is prohibited. Please refer to our CNET Forums policies for details. All submitted content is subject to our Terms of Use.
Track this discussion and email me when there are updates

If you're asking for technical help, please be sure to include all your system info, including operating system, model number, and any other specifics related to the problem. Also please exercise your best judgment when posting in the forums--revealing personal information such as your e-mail address, telephone number, and address is not recommended.

You are reporting the following post: Windows 7 & XP networking
This post has been flagged and will be reviewed by our staff. Thank you for helping us maintain CNET's great community.
Sorry, there was a problem flagging this post. Please try again now or at a later time.
If you believe this post is offensive or violates the CNET Forums' Usage policies, you can report it below (this will not automatically remove the post). Once reported, our moderators will be notified and the post will be reviewed.

All Answers

Collapse -
Answer
I've always used Network Magic
by wpgwpg / February 26, 2013 11:46 AM PST
Collapse -
Network Magic
by Syncopator / March 1, 2013 3:22 AM PST

According to what I have read on the net, Magic works only with Lynsky/Cisco routers.

Collapse -
Answer
Details Needed
by sunwatcher / February 26, 2013 12:29 PM PST

What specific problem are you having with regards to networking the machines? Someone should be able to get you started if you help us understand the issue. If it's something with a particular piece of software, please provide details.

This MS site might help you out if it's just a file sharing issue.

I have XP on a desktop, Windows 7 on two laptops and Vista on another. I regularly share files and folders, and stream video and audio with no special software involved. Perhaps you only need try it out and see what works.

Collapse -
Answer
This Is How We Do It...
by Grif Thomas Forum moderator / February 27, 2013 2:11 AM PST

First, IF any XP computers are on the network, install LLTD on the XP computer to help Vista map the XP computer better.

http://www.microsoft.com/downloads/details.aspx?FamilyId=4F01A31D-EE46-481E-BA11-37F485FA34EA&displaylang=en

1. Plug router into the modem, then connect all computers to the router.. Make sure they all have an internet connection. Then adjust any router settings such as a wireless security password by using the wired computers only.

2. Create the EXACT same username on all computers, with the same password, and give that user administrative privileges. (Don't use the default "adminstrator" login.. Create a new admin user on all machines.)

3. On all computers, login using the new username, change the "Workgroup" to be exactly the same.. (RIGHT click on "Computer", choose "Properties", select "Advance system settings" in the upper left, then click on the "Computer Name" tab. When that opens, click on the "Change" button next to "To rename this computer or join a domain". On the next window, place a dot/tick in the "Workgroup" selection and give the the workgroup a name..) Make sure all computers have the same workgroup name.

4. Make sure all computers have "File and Printer Sharing for Microsoft Networks" enabled. Open the Control Panel/Network & Sharing Center" icon, select "Change Adapter Settings" in upper left, then RIGHT click on the "Local Area Connection" icon, choose "Properties". When that window loads, make sure the box next to "File and Printer Sharing for Microsoft Networks" has a CHECK mark in it.

Also make sure "Network Discovery" is enabled on all your computer by opening the same Control Panel/Network & Sharing Center" icon, then select "Change advanced sharing settings". Once there, make sure your "Home or Work" network settings have "Turn ON network discovery" enabled.

5. This next section depends on the version of Windows you're using.. Home versions of Windows 7 are slightly different than Pro versions, but it should give you a starting point. If you're wanting to share folders between computers, On computer 1, share out the files, folders and printers by opening Windows Explorer, RIGHT click on the C: drive, choose "Sharing and Security" or (Share With)-"Advanced Sharing", then click on the "Advanced Sharing" button. At the next window, place a CHECK mark in the "Share this folder on the network", then follow the prompts to share the drive. Click on Apply, then OK.. Perform the same thing on computer 2, etc... You should now be able to see and share folders between computers.

Please note, sharing the entire C: drive per the instructions above is not safe.. IF you're going to share files between computers, it's best, after following the above instructions, to then share out a single folder, such as the "My Documents" folder.. Once the "My Documents" folder is correctly shared, you can then return to the C: drive and "unshare" it.. After doing so, the "My Documents" folder will remain shared but the entire C: drive will be invisible.

6. In order to share a printer with others on the network, on the computer where the printer is installed, you'll need to click on Start-Device and Printers', then RIGHT click on the installed printer and "Share" it.

If connecting to a shared XP printer from a Vista/Win7 machine, instead of installing a new "network" printer from the Vista/Win7 computer, install the printer as if it was a "local" computer using the instructions below. (Yes, I know it's "network" printer but please try the instructions below.):

Go to Control Panel. Choose printer. Then choose Add Printer.

Choose Add a local printer. Click on Create a new port. The default in the drop down box is Local Port. Do not change that. Click Next.

A dialogue box will appear asking for you to enter a port name. Type in the \\computer name\printer name of the XP machine....ie. My computer's name is basement and the printer name is EpsonSty so I typed in \\basement\epsonsty

Next, see the link below for other networking tips:

http://forums.cnet.com/5208-7589_102-0.html?threadID=264135#2584349

Hope this helps.

Grif

Collapse -
Answer
Specific problem/s
by Syncopator / March 1, 2013 3:23 AM PST

After solving a few, the remaining one was that I was unable to print from the remote computer.

That, too, has now been overcome.

Popular Forums
icon
Computer Help 49,613 discussions
icon
Computer Newbies 10,349 discussions
icon
Laptops 19,436 discussions
icon
Security 30,426 discussions
icon
TVs & Home Theaters 20,308 discussions
icon
Windows 10 360 discussions
icon
Phones 15,802 discussions
icon
Windows 7 7,351 discussions
icon
Networking & Wireless 14,641 discussions

Tech explained

Do you know what an OLED TV is?

CNET explains how OLED technology differs from regular TVs, and what you need to know to make the right shopping decision.