Windows Vista forum


Vista Update (problem)

by kobster683 / March 9, 2013 5:09 AM PST

I recently just updated my desktop with a nvidia graphics card from windows vista sp1 to sp2. When i switched on my computer it told me that it cannot find my graphics on the boot and sent me to bios screen. I did not know what to do there so i continued the boot up. Right now it is telling me i am using an intel(R) G33/G31 express chipset family. I do not know what to do now... Please help!

Here are my spec if you need it:
Intel core 2 duo cpu E6550 @2.33GHz (2 cpu's)
Was Using Nvidia graphics (cannot remember which one)
4 GB Ram
500 GB hard drive

Post a reply
Discussion is locked
You are posting a reply to: Vista Update (problem)
The posting of advertisements, profanity, or personal attacks is prohibited. Please refer to our CNET Forums policies for details. All submitted content is subject to our Terms of Use.
Track this discussion and email me when there are updates

If you're asking for technical help, please be sure to include all your system info, including operating system, model number, and any other specifics related to the problem. Also please exercise your best judgment when posting in the forums--revealing personal information such as your e-mail address, telephone number, and address is not recommended.

You are reporting the following post: Vista Update (problem)
This post has been flagged and will be reviewed by our staff. Thank you for helping us maintain CNET's great community.
Sorry, there was a problem flagging this post. Please try again now or at a later time.
If you believe this post is offensive or violates the CNET Forums' Usage policies, you can report it below (this will not automatically remove the post). Once reported, our moderators will be notified and the post will be reviewed.
Collapse -
You didn't write if the update was successful.
by R. Proffitt Forum moderator / March 9, 2013 5:11 AM PST
In reply to: Vista Update (problem)

As it stands my advice is to go back to what worked, unplug the unknown video card and System Restore to before you started.

Collapse -
Vista Update (problem)
by kobster683 / March 10, 2013 6:29 AM PDT

yes the u[date was successful.

Collapse -
So the issue is some message?
by R. Proffitt Forum moderator / March 10, 2013 8:58 AM PDT
In reply to: Vista Update (problem)

Given so little detail it is possible you are plugged into the motherboard video connection.
It's also proper on some boards for the onboard to continue working.

Check what video port you are using.

Popular Forums
Computer Help 49,613 discussions
Computer Newbies 10,349 discussions
Laptops 19,436 discussions
Security 30,426 discussions
TVs & Home Theaters 20,308 discussions
Windows 10 360 discussions
Phones 15,802 discussions
Windows 7 7,351 discussions
Networking & Wireless 14,641 discussions

Smart Home Help

Light bulbs you shouldn't buy

There are plenty of dimmable LED light bulbs, but make sure you don't buy the ones that flicker when you dial them down.