6
This content is rated TV-MA, and is for viewers 18 years or older. Are you of age?
Sorry, you are not old enough to view this content.

Wearable Tech: Cracking Open: Pebble Steel

About Video Transcript

Wearable Tech: Cracking Open: Pebble Steel

2:41 /

Bill Detwiler shows you how to crack open the Pebble Steel and gives you a run down on the hardware inside this stylish smartwatch.

The Pebble Steel is definitely more stylish than the original Pebble smart watch, and thanks to its metal body and several design changes, it's also easier to disassemble. I'm Bill Detwiler, and this is Cracking Open. [MUSIC] The Pebble Steel, is a clear step up from the original Pebble watch, in both design and construction. It has a Gorilla Glass covered display, a steel body, and it comes with both leather and metal bands. It weighs just under two ounces, which is about half an ounce more than the original Pebble. The body, however, is actually just a tiny bit smaller. The Steel also has redesigned buttons, a slightly different magnetic charging connector, and a new LED, which shows the charging status. On the inside however, the Steel has basically the same hardware as the plastic Pebble. A Cortex-M3 ARM MCU, a tiny bit of storage,a three-axis accelerometer, a magnetomer, and an ambient light sensor. Now, unlike the original Pebble, opening the Steel, isn't that difficult. First, remove the four torx T4 screws on the back cover. Then gently pop the cover off and remove it. Now once inside the Steel, we can detach the single ribbon cable, connected to the circuit board, and then gently pry the battery away from the adhesive underneath. Lastly, using a thin metal tool, I was able to pop loose and remove the circuit board, and the attached components. The Steel's e-paper display, button contact, and internal plastic frame, appeared to be glued to the metal body. If any of the components were damaged, you could likely remove and replace the entire assembly. But as I want to reassemble this device in working order, I'm going to call this tear down complete. The Pebble Steel is definitely a smart looking smart watch. And thanks to its removable back cover, you can replace the internal hardware, if it gets damaged. I only wish Pebble had made the parts a little more modular. Now, doing this, would have made it possible for Steel owners to upgrade their watches, as new hardware was released, instead of having to toss out their entire $250 watch. Now for more information on the Steel, including real world tests, check out the full CNET review. To see more teardown photos, and read my full hardware analysis, go to techrepublic.com/crackingopen. [MUSIC]

New releases

Koenigsegg Regera
1:27 4 March 2015
At the 2015 Geneva Auto Show, Swedish supercar maker Koenigsegg rolled out the Regera which just might be the most powerful plug-in...
Play video
Nvidia Shield
2:59 4 March 2015
The Nvidia Shield offers gamers an affordable, high-performance set-top box that combines the best of Android TV and Nvidia's own GRID...
Play video
Tomorrow Daily 138: Learning to cook with VR, a robotic bear caregiver and more
24:12 4 March 2015
On today's show, we take a look at the world's first 3D-printed jet engines, discuss an app that helps you learn to cook via virtual...
Play video
Maker builds cool DIY drones inspired by 'Star Wars'
1:27 4 March 2015
2015 might be the year of the drone, and to back up that claim here's a look at two "Star Wars"-themed drones created this year by...
Play video
Smart Home Buying Guide: Home Automation
1:57 4 March 2015
Automation promises to make your life easier -- let us make it a little easier for you to get started.
Play video
Pebble Time rocks Steel design, BlackBerry struts old-school slider
2:57 4 March 2015
The Kickstarter record-breaking smartwatch adds a new model for preorders, and BlackBerry returns to phone designs of the past. Also,...
Play video
How to catch a cyberthief
2:22 4 March 2015
What does it take to catch cybercriminals who hack into computers to steal personal and financial information? CNET's Kara Tsuboi takes...
Play video
On the road: Alfa Romeo 4C
5:32 4 March 2015
Alfa Romeo is back in the US, and Brian Cooley tells you how its 4C sets the table for models yet to come.
Play video