Sometimes it can be hard to distinguish between two TV models from the same brand. So what sets the Sony Bravia HX850 series apart from the, aside from price difference? (The price gap is AU$600 for the 55-inch, 140cm model.)
Not much, at first glance. They even use identically numbered firmware. But look a bit closer, and you'll see that the more expensive model gets the full-sheet-of-glass treatment, in which the bezel doesn't protrude forwards, but is simply blanked out in sections on the underside of the glass. The glass itself is Corning Gorilla Glass, so it should stay looking good. The panel is also quite thin, at just 35mm. The stand has a kind of forward-reaching neck, so there is no obvious pedestal, giving the unit a free-floating look.
This TV is also compatible with the optional speaker stand. This is a low-set aluminium-look bar with built-in active loudspeakers. It allows better sound, and lets the TV tilt back by 6 degrees.
The bezel, at 28mm to 31mm in width, is far from the leading-edge 3mm width offered by some brands.
As seems to be increasingly the case with various TV brands that things like contrast ratio and brightness are not specified for the panel. But it does offer the usual full high-definition resolution, and full support for 3D. This uses an active system with synchronisation by means of IR (the IR transmitter is built in to the TV). You get one set of glasses — fairly chunky 56-gram ones — with the TV. Additional sets cost AU$149. They use rechargeable batteries, so you will need to plug them in to USB ports a couple of times a year. Those on the TV suffice.
The TV has the usual ports — support for everything except S-Video. There is a headphone output that can be used, at a pinch, to feed an analog sound system. The HDMI connection supports such up-to-date things as the Audio Return Channel on HDMI. As with the HX750 series, though, this tends to make the remote control lose its focus on controlling the TV, and shift over to controlling the source device.