Asus AC2400 RT-AC87U Dual-band Wireless Gigabit Router
ASUS RT-N66U - wireless router - 802.11 a/b/g/n - desktop
ASUS RT-N56U - wireless router - 802.11 a/b/g/n - desktop
Linksys WRT1900AC Wireless Routerstars
Looking for the most powerful (and DIY-friendly) router for your home? Linksys' latest...
Despite its consumer-friendly name, the HP Media Vault is essentially a network-attached storage (NAS) drive with media-streaming capabilities. The drive is available in two capacities: the 300GB Media Vault MV2010 costs AU$599, and the 500GB MV2020 costs AU$799. We tested the MV2020 model. Both drives ship with a single hard drive and an empty bay to add a second drive for more capacity or a RAID 1 array. The Media Vault can stream audio and video to any UPnP-compliant digital media adaptor and comes with backup and restore software, a pre-installed full-length movie, and two free movie downloads from CinemaNow. Though both Media Vault models represent a reasonable per-gigabyte price, the is slightly less expensive per GB, with a 1TB drive retailing for about AU$1999, and there are larger sizes available. Still, since the HP Media Vault lets you choose what drive to put in the second bay, you could easily create a 1TB drive for less than AU$2000 by finding a good deal on a hard drive. And even better, the HP Media Vault is quick with data transfers, making it an excellent option for the networked home user with tons of digital data and the desire to share it.
The silver-and-black Media Vault looks a lot like HP's own Slimline desktops. Its design is spare: on the front is a series of lights for power, network connection, disk activity and a single USB 2.0 port. A black-plastic door conceals the empty drive bay, and a lone power button graces the bottom of the device's face. On the back are two additional USB 2.0 ports, a Gigabit Ethernet port, and a power port. The built-in print server lets you network any compliant printer using the USB ports -- as many as three printers. Alternatively, you can use the USB ports to attach additional external hard drives.
You can add a second SATA drive to the empty drive bay -- IDE drives are not supported -- to increase your capacity or to set up a RAID 1 array. RAID 1 simply copies what's saved to the first drive to the second, so you have redundancy but not increased write-speed. Should one drive fail, you have everything copied onto the second drive. Keep in mind, though, file errors and bugs are also copied, so while RAID 1 is better than nothing, it's not the most secure solution either. (RAID 1 also reduces your overall capacity.) The Buffalo TeraStation Home Server offers RAID 5 capability, which is better for data security, though transfer times take a hit. The maximum capacity for the Media Vault, including secondary SATA drives and external USB hard drives, is 1.2TB.
Installing the Media Vault is a simple process: Plug the drive in and connect it to one of your router's LAN ports using an Ethernet cable. Power it up and wait to see that the power and network lights are properly lit. Then install the backup and restore software and the Media Vault utility from the included CD. During the installation process, you'll be prompted to map a drive letter to each of the shared folders on the Media Vault. (If you choose to skip this step, you can also map the drives later using Windows XP.) There are a couple of things to keep in mind for a successful installation. First, the DHCP server on your router needs to be enabled. Second, you may need to turn off any software firewalls on your PC. HP's support documentation indicates a known problem with Norton's firewall, but we ran into the same problem using a PC-cillin firewall. We turned off the software firewall to finish installation, then turned it back on once we were done. With the PC-cillin firewall turned on, the Media Vault utility couldn't find the drive again, although we were still able to access it because we had mapped the folders on the drive. In order to continue using the MV utility, we had to leave the PC-cillin firewall off (though our router's firewall was still up and running).
Once the Media Vault is installed, you can access it a couple of different ways. If you chose to map the drives, you'll find the mapped drives under Network Drives in My Computer. Alternately, you can double-click the Media Vault utility icon on your desktop, and click the Start Browsing Your HP Media Vault link. Each PC on your network should be able to see the Media Vault folders on the network. You can either manually map the folders on each PC or install the MV utility. The Media Vault comes with four preset folders: Backup, FileShare, MediaShare, and CinemaNow. You can rename or delete any of these folders and add any number of additional folders and subfolders, but HP warns against changing the names of the preset folders if you want to use them as HP intends. The Backup folder is where file/folder and disk backups are stored. FileShare is intended for any files you want to share across your network. MediaShare is a repository for audio, video, or picture files. (More on CinemaNow later.)