Harman Kardon AVR 161 review: Harman Kardon AVR 161

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
MSRP: $399.95

Harman Kardon AVR 1610

(Part #: AVR 1610)
Compare These
3.5 stars

CNET Editors' Rating

The Good Good sound quality. Bluetooth built in. Good value for money.

The Bad No support for low-impedance loudspeakers. Weak navigation on network media.

The Bottom Line The Harman Kardon AVR 161 is a good entry-level receiver with useful things like built-in Bluetooth and vTuner, but its network media support is hobbled by poor navigation and weak apps.

7.0 Overall

Harman Kardon's latest range of receivers take a radical approach to one aspect of design. Instead of the traditional iron-core transformer, they use a digital power supply. The result is the Harman Kardon AVR 161 five-channel home-theatre receiver, weighing just 4.6 kilograms. It looks a bit chunkier, so I kept being surprised every time I picked it up.

The five amplifiers are each rated at 85 watts and require loudspeakers rated at an impedance of at least 6 ohms, ruling out some options. There is no support for other zones, and the five amplifiers are locked into their basic functions. The receiver supports 7.1 channel audio from Blu-ray discs, but the two surround back channels are mixed down into the regular surround channels.

You get five HDMI inputs (one supports MHL), all on the rear panel, with a USB socket on the front. And a network connection. Unusually for a home-theatre receiver, Bluetooth is built in.

Set-up

The receiver comes with only a 10-page quick-start guide in the box to apparently "conserve our natural resources". If you want the proper 52-page manual then you're going to have to find your way to the UK website of Harman Kardon and download it. Other brands that don't want to print a big manual slip in a CD with the PDF manual.

Otherwise, set-up was mostly unremarkable. There's an automatic calibration system called EzSet/EQ. Rather than using blasts of pink noise, this one sweeps up simple tones from deep bass to high frequencies, four times for each speaker, to do its measurements. It wrongly decided that all my speakers — the ones that some other receivers equally wrongly take to be all Large — were all Small and set their crossovers to the subwoofer at 80 hertz. As always with any receiver, check this setting and change it manually if it seems warranted.

Harman Kardon tends to have its receivers default to delivering surround-sound processing of one form or another with stereo inputs. The first stereo music I listened to had a rather echoey surround effect thanks to something called Virtual Surround. If you like your sound reasonably pure, take a few minutes to go and set the default sound modes.

(Credit: Harman Kardon)

Sound and picture performance

I steered clear of my more demanding loudspeaker system and went for one with good sensitivity (ie, greater acoustic output for a given input power) and reasonably high impedance (6 or 8 ohms). The results were very impressive in terms of sound, both with movies and music (after I'd turned off that surround processing). You don't actually need a huge headline power rating for high sound levels if you choose your loudspeakers wisely. Better amps mostly just give you more options. The difference in output between 85 watts and 100 watts is seven tenths of a decibel.

Editors' Top PicksSee All

  • Yamaha RX-V379

    Starting at: $599.00
    4 stars

    Unless you have a huge home theater or tough-to-drive speakers, the Yamaha RX-V379's combination...

  • Onkyo TX-NR646

  • Sony STR-DN1060

    4 stars

    The Sony STR-DN1060 receiver offers more features than previous years while offering the...

  • Marantz SR5009

    Starting at: $1,249.06
    4 stars

    The Marantz SR5009 looks and feels more upscale than the competition's receivers, and...

 

Discuss: Harman Kardon AVR 1610

Conversation powered by Livefyre