Energy Take Classic 5.1 Home Theater System - speaker system - for home theatrestars
Energy Take Classic 5.1
The Pioneer SP-SB23W is the best affordable sound bar if you care about sound quality,...
Bose SoundLink Bluetooth speaker IIIstars
Though it remains somewhat pricey, Bose's SoundLink Bluetooth speaker III, improves on...
Pioneer's budget 5.1 speaker package performs nearly as good as systems that cost twice...
The Denon DHT-T100 is aptly named a 'TV Speaker Base'. That is clearly the intended role for the device, and Denon has made it very easy to install for that function. It is designed to sit in your TV's normal place, with the TV on top of it. You then just plug the optical (or coaxial digital for the rare TV with that type of output, or analogue audio for TVs with neither) output into this unit, plug in the power, put the button battery in the remote and you're right to go.
There is no subwoofer to adjust (nor is there a subwoofer output at all — the bass provided by this system is what it is and there's no changing it). You can change sound modes: various surround options, or select a night mode that compresses the sound's dynamic range.
You can also program the unit to respond to your TV's remote if you find that more convenient. And you'll likely want to pair it to at least one Bluetooth device for music playback. The unit supports the rarer but purportedly higher quality Apt-X Codec (in addition to the standard SBC Codec) for Bluetooth.
One possible objection to sound bases as a concept is that they lift the TV higher than looks natural to the eye. Obviously that is quite unavoidable. At 71mm, this one does that less than some of the others I've seen. It will support up to 27kg, and accommodates a maximum TV stand size of 546 x 308mm.
Inside are four speaker drivers: a pair of 14mm tweeters at the extreme left and right of the front panel, and two 51mm x 127mm oval bass/midrange drivers. The sturdy enclosure has two bass reflex ports, both at the back. To operate effectively in enhancing the bass, these should have some clearance from walls and not be blocked into a nook in an entertainment unit.
As I've implied, setting up took all of two seconds. Until I tried to use the remote control. The unit was quite unresponsive to it initially. I popped the battery back out and checked its charge and it was full, but still nothing. So I went through the 'learning' procedure you use for other remotes and had the unit learn its own. All worked fine after that.
The only other wrinkle was that at first I couldn't get the system to produce any sound from my Blu-ray player via optical digital. Then, after perhaps ten or fifteen seconds it suddenly started working. The unit auto-selects the physical input, so it there may have been a delay while it was polling them to see which was connected. Thereafter there were no such delays.