ultimate ears

1964 Ears custom in-ear headphones beat their competition on price

1964 Ears makes custom-molded, in-ear headphones, just like Ultimate Ears, JH Audio, and Westone, but 1964 Ears is a relative newcomer. It has to try harder than the more established brands, so 1964 Ears offers a wider array of customizable features and service options than the others. Prices start a little lower, at $350 for the 1964-D, and $650 for the top-of-the-line model I'm reviewing here today, the 1964-V6. That's significantly less expensive than the established brands' flagships.

1964 Ears can also "remold" your old universal-fit balanced-armature headphones, like a Shure or Etymotic pair, and make … Read more

Ultimate Ears' new ultimate: The Personal Reference Monitor

With most speakers or headphones, you're stuck with the designer's sound, but with the Logitech UE Personal Reference Monitors (PRM) you get to play headphone designer and dial in exactly the sound you want.

Each pair is totally unique; they're built with the individually designed equalization curves you selected. My PRMs sound absolutely amazing, but I'm a little biased, I designed them to please my ears! Every PRM buyer will do the same, and if they totally screw up and hate the result, Ultimate Ears will give them another try. Each PRM set is handmade in UE's facilities in California.

The price for this level of customization doesn't come cheap, though; the Personal Reference Monitors sell for $1,999. That's extreme, but so are $285,000 luxury cars. I cover the full gamut of audio, from affordable to the craziest expensive gear. … Read more

Heir Audio headphones: The new kings of clarity?

I'm a lucky guy; audio companies keep asking me to check out their gear, and that's not a bad way to make a living. Before you get too jealous, I have to listen to a lot of crap to find the good stuff. There's a lot of shipping to and fro, and that's not a fun part of my work. Every now and then something really special arrives, and that makes it all worthwhile.

The nice folks at Heir Audio sent over two models of universal-fit headphones, the 3.Ai and 4.Ai, and even before I popped 'em in my ears I thought they might be out of the ordinary.… Read more

Logitech UE rolls out new wave of headphones and wireless speakers

Logitech purchased the Ultimate Ears headphone line way back in 2008. Since then, slowly but surely, the UE logo has been creeping in as the upscale Logitech audio brand -- witness the UE AirPlay speaker from earlier this year.

As of today, the Logitech UE branding officially goes large with the introduction of seven new audio products. Among the new models are two mobile Bluetooth speakers, three new headphones with memory foam cushions, a noise-isolating in-earphone with four-armature speakers in each earpiece, and the next evolution of the Squeezebox Radio powered by Logitech UE's new mobile companion app.… Read more

The 404 1,107: Where we're all friends with Gems (podcast)

- What artists and songs were found on John Lennon's long lost jukebox?

- Ultimate Ears' custom tuned in-ear monitors.

- Condav99's custom Nintendo Boomcase! More on Boomcases here.

- Can a tiny $39 amp make your headphones sound a lot better?

- The Audiophiliac picks 11 of the world's best headphones.

- The Philips Shoqbox is our favorite camp-friendly, rugged Bluetooth speaker.

- Self-portraits done to a different drug every day.

Follow Steve Sphere Guttenberg on Twitter.

Bathroom break video: Steve Coogan impersonates Steve Hawking.… Read more

Are headphones that are custom-molded to your ears worth it?

It was probably 10 years ago when I heard my first custom headphones, and I couldn't get over the sound. It was an Ultimate Ears UE-5 model, and the level of detail was so much better than any previous headphones I'd tried. The custom earpieces' superior noise-isolation dividends were also part of the appeal, because as the background noise level goes down, the apparent detail goes up. With less environmental noise overpowering the subtle/quiet details in the music, I could listen at lower volume levels. Once you've experienced what custom-molded headphones can do, it's hard … Read more

Headphone geekfest in Babylon, NY

Head-Fi is a national headphone club, and I went to the local meeting in Babylon, N.Y., last Saturday.

The vibe was friendly, and it was great to hear Head-Fi members' home-built gear, but there were a few surprises popping up from the headphone and electronics manufacturers in attendance.

Logitech Ultimate Ears' Personal Reference Monitor in-ear headphones feature a new twist on custom-molded-to-your-ears headphone design. Lots of brands now make custom in-ear headphones, and Logitech's have been among my favorites for years, but the upcoming Personal Reference Monitor takes the personalization to the next level. Once your ear canals' &… Read more

The 404 1,065: Where it's all in our heads (podcast)

Today's episode of The 404 is a valuable resource for anyone obsessed with headphones -- classic audiophiles, young audiophiliacs, musicians, producers, and casual listeners will all benefit from Steve Guttenberg's knowledge, and he brought a friend! Tyll Hertsens is largely credited for creating the first portable headphone amp and currently the editor-in-chief of InnerFidelity.

With Tyll's help, we'll run through the differences between on-ear and in-ear headphones, give credit to two companies responsible for introducing high-quality headphones to the next generation of audiophiles, and we'll even spend a little time dissecting the criteria for what makes a headphone "sound good."… Read more

Upgrade your headphones' sound with Musical Fidelity's new amp

I've been a fan of Musical Fidelity from its beginnings in the early 1980s. The British company's original 30-watt-per-channel stereo A1 integrated amplifier was a hit with budget-minded audiophiles back in the day, and it also offered seriously expensive gear.

Musical Fidelity started making headphone amplifiers long before the current headphones craze started. The model we're looking at today is Musical Fidelity's pure Class A M1 HPA headphone amp ($799).

The HPA has very low output impedance (below 1 ohm), so Musical Fidelity claims it can "drive" any headphones with ease. The circuit is a fully discrete Class A design, with no op-amps in the audio path, so it's built like a small high-end power amp. The HPA has two inputs--line and USB--and there's a variable output, so the HPA can be used as a stereo preamplifier in a hi-fi system. It has two 6.3mm headphone jacks on the front panel.

Some previous generations of Musical Fidelity's styling were a little over the top for my taste, but the M1 HPA is understated and very classy. … Read more

Headphones and bass: It's all in your head

For most people bass quality and quantity loom large when judging headphone performance. Bass supplies the music's weight and power, so bass-shy headphones can sound thin and tinny.

Sure, the same argument could be made about speakers, but their bass is perceived in very different ways than headphone bass. Speaker bass is literally visceral, your whole body feels it, and you hear it filling the room you are in. Subwoofer bass is even more visceral, and there's no headphone equivalent for that.

So while a decent set of headphones can play low-bass frequencies that are in subwoofer territory, … Read more