panel speakers

Desktop audio has never been important to me. I already have a high-end hi-fi in my apartment, so while I occasionally play music on my Audioengine P4 speakers that live on my desktop, I'm not really listening. The music is just there in the background. When I want to listen, I turn on my hi-fi.

That's me, but for some 21st-century audiophiles, the computer is the primary music source at home. That's why Magnepan has designed the all-new Mini-Maggie system. I was the very first reviewer to audition it, and to say I was impressed would be … Read more

Most speakers--from the affordable models to state-of-the-art contenders--are box designs. Some are tall, slender boxes, some are tiny cubes or spheres, but they all have some type of cabinet. Unless you're an audiophile, just about every speaker you've ever heard has dome tweeters and cone drivers, so you might conclude that all speakers are made that way. Standing apart from the crowd, Magnepan speakers are slender, flat-panel designs, less than a couple of inches thick. The speakers don't rely on conventional tweeters and woofers; Magnepan speakers' sound-producing elements are proprietary thin-film drivers.

Magnepan's Jim Winey started … Read more

Just about every speaker you've ever heard uses cone woofers and dome tweeters that feature a coil of wire in a magnetic field that pushes the diaphragm back and forth to make sound. Lots of great audiophile-grade speakers use conventional drivers of this type.

Flat electrostatic panel speakers work on a completely different design principle. These speakers use a superthin, but large, surface area diaphragm, coated with a conductive material sandwiched between two electrically conductive grids.

Electrostatic speakers produce levels of distortion one to two orders of magnitude lower than conventional cone drivers in a box. Electrostatic speakers' clarity is extraordinary. The big downside is high cost, but electrostatic speakers have been popular with audiophiles for many years.

MartinLogan is America's best-known manufacturer of electrostatic speakers. I've heard previous generations of the company's speakers many times, and was consistently impressed by their sound. Its all-new ElectroMotion series of speakers will feature electrostatic and MartinLogan's proprietary Folded Motion drivers. … Read more

Magnepan, based in White Bear Lake, Minn., has built nothing but flat-panel speakers since 1969. The company will be premiering a new speaker, the MG 3.7, at the Consumer Electronics Show in Las Vegas, from January 6-9. To some this may appear to be a deja vu event, mirroring last year's introduction of the MG 1.7, which turned out to be one of my speaker of the year picks for 2010.

But I wouldn't want you to think of Magnepan as one of those companies that rolls out "all new" models every year. The … Read more

I've probably listened to and reviewed a thousand speakers, and truth be told, the majority of them never sound like live music. They sound like speakers.

The "problem" with box speakers is that you're always aware the sound is coming out of a box, but Magnepan speakers don't have a box. And they don't have dome tweeters or cone midrange or woofer drivers, either. Magnepan technology is radically different than what you find on box speakers, so the 1.7's sound "floats" free of the speakers themselves.

The new Magnepan 1.7 ($1,995 per pair) looks a lot like the model it replaces, the 1.6, which was regarded by many of the world's high-end audio critics, including me, as one of the greatest less-than-$2,000 speakers on the market. The 1.6 stayed in the line for more than 10 years, and I have every reason to believe the 1.7 will be a standard bearer for just as long. And speaking of value, Magnepan also offers a factory-direct $599 (per pair) panel speaker, the MMG. The technology isn't as advanced as the 1.7's, but it's miles ahead of any other $599 speaker I can think of.

The 1.7 panel is 64.5 inches high, 19.25 wide, and just 2 inches thick. Magnepan builds all of its speakers in White Bear Lake, Minn., and almost all the 1.7's parts that aren't fabricated in-house are sourced from U.S. suppliers. I reviewed the 1.7 for Tone Audio magazine, where you can read the complete review.

The 1.7's technology is unprecedented for Magnepan; the speaker is the company's first "full-range ribbon" design. It's also worth noting that what makes a well setup pair of 1.7s so special isn't just something that only dyed-in-the-wool audiophiles would notice; pretty much anyone with ears will immediately grasp what's going on. Their box-free sound is astonishing.… Read more

Every year product life cycles in the consumer marketplace grow ever shorter and we see ever faster turnover in cameras, phones computers, and so on. On the audio side, the latest and greatest receivers become yesterday's news faster than you can say "HDMI 1.4." It seems like no receiver can stay current for more than a year or so.

Speaker companies show a little more restraint and "refresh" their lines every few years, but even then new models rarely demonstrate actual performance improvements over the previous generations' models. Speaker manufacturer Magnepan doesn't play by those rules; it invests years of development in each of its models before introducing a new speaker. It has to sound better--a lot better--than the outgoing model before it's released to the world.

And not just in the opinion of the designers. New-model Magnepans undergo extensive "blind" listening tests with a wide range of audiophile and non-audiophile listeners (the listeners don't know whether they're hearing the old or new model). The new speaker must consistently score better than the old model before it goes into production.

When I first heard the Magneplanar 1.6 back in 2008 I said it was the best under-$2,000 speaker on the market. Incredibly enough it was 10 years old at the time! The Magneplanar 1.6 has stayed in production for 12 years, but now it's about to be replaced with the new Magneplanar 1.7.

Magnepan, based in White Bear Lake, Minn., builds nothing but panel (boxless) speakers. Not only that, Magnepan designs forgo conventional dome tweeters and cone-type woofers. As I pointed out in my August 14, 2008, blog that's why the company's Magneplanar 1.6 speaker mostly avoids sounding like a speaker. The speaker earned the top position in my Top 10 greatest audiophile speakers blog earlier this year.

The new Magneplanar 1.7 is also a flat-panel design, 64.5 inches tall and a mere 2 inches thick! The new speaker looks a little more contemporary, thanks to its aluminum, wrap-around edge molding. The old model was a two-way design, with a 48-inch-tall aluminum ribbon tweeter and a 442-square-inch mid/bass panel. The Magneplanar 1.7 is a three-way design, with a woofer, tweeter, and super-tweeter. The super-tweeter comes in around 10,000 hertz and is said to produce wider dispersion and better-resolved treble than the Magneplanar 1.6 did.

The other big difference is the Magneplanar 1.7 is a "full-range" ribbon design.… Read more

I've reviewed a gazillion speakers, and I can't remember more than a few dozen of them. They're just a string of big and little boxes; some sounded really nice, most were merely OK, and surprisingly few were truly awful.

Magnepan's speakers stand out from the crowd first because they're so thin, the MG 3.6/R is 1.5 inches thick, and standing 71 inches high, it's really tall. But it was the sound that blew me away. It's an incredibly clear, high-resolution sound, and sounds decidedly unspeakerlike. That's why it's the Audiophiliac's Speaker of the Year.

As I said in my Home Entertainment magazine review "That's why the MG 3.6/R will sound like a revelation to first-time listeners; the gap between the sound of real, live music and recorded music feels a whole lot smaller. The speaker projects a more full-bodied, three-dimensional soundstage than any box can; correction, the MG 3.6/R's sound was bigger and deeper than I've ever heard from a speaker retailing for less than $50,000. With the MG 3.6/R instruments and voices emerge closer to their real-life scale and size. Clearly, Magnepan engineers changed the way speakers move air."

Instead of the usual woofer and tweeter, the MG 3.6/R uses three "planar-magnetic" drivers: a 55-inch tall aluminum foil "ribbon" tweeter; a 199-square-inch 0.5-mil-thick Mylar midrange diaphragm; and a 500 square inch Mylar woofer. The speaker is essentially a panel that moves air, and projects sound from its front and rear surfaces. The drivers are Magnepan patented designs, all manufactured at the company's factory in White Bear Lake, Minnesota. American hi-fi at its best.… Read more

A perfect speaker wouldn't sound like a speaker. That's the goal after all, the speaker should disappear and we should just hear the sound. With perfect speakers the instruments and voices on the recording would sound life-size and completely believable.

Most speakers, including a lot of very high-end, stupid expensive ones still sound like speakers. You know there's a tweeter and woofer, and the sound is coming out of a box.

Magnepan, based in White Bear Lake, Minnesota builds panel (boxless) speakers -- without conventional dome tweeters and cone type woofers. Maybe that's why its MG … Read more